1B - Spreadsheet was extremely challenging for me; it took me over 2 hours to get AC. I didn't find the editorial helpful, and then when I went to see practice solutions from red/orange people, it made even less sense (they were basically copy/paste with minor variation):

    #include<cstdio>
    void g(int t){if(t){g((t-1)/26);putchar(65+(t-1)%26);}}
    int main(){
    	int n,x,y;
    	char s[64],*p;
    	for(scanf("%d ",&n);n--;){
    		gets(s);
    		if(sscanf(s,"%*c%d%*c%d",&x,&y)==2){
    			g(y);
    			printf("%d\n",x);
    		}else{
    			for(x=0,p=s;*p>64;++p) 
    				x=x*26+*p-64;
    			printf("R%sC%d\n",p,x);
    		}
    	}
    	return 0;
    }

I'll talk about each part of the problem itself and approaches/alternatives, and then explain how the above solution (henceforth "the solution") handles it. I'll go into unnecessary detail since I'm very new to CP/CF and would've wanted this level of detail myself.

Problem statement

Input: First line is an int representing the number of test cases. Each following line is a string of characters specifying a spreadsheet cell, in one of two formats:

• "Excel": ^[A-Z]+[0-9]+\$ (e.g. BB352).
• "RC": ^R[0-9]+C[0-9]+\$ (e.g. R253C55).

Output: For test case, we must output the same cell specified in the opposite format. Example:

2
R23C55
BC23

should output

BC23
R23C55

Constraints:

• Between 1 and 10000 test cases (all valid in either format)
• In each case, the row and column numbers are no larger than 1000000 (so each line is 16 chars at longest since we never exceed R1000000C1000000 / BDWGN1000000).

Approach

Our implementation needs to do 3 things:

• Convert from Excel to RC
• Convert from RC to Excel
• Determine which format the input is in, and do the right conversion on it

The heart of this problem is a change of base; RC-format uses two base-10 numbers, whereas Excel uses one for rows and a quasi-base-26 character string for columns.

Determine format

Note that for RC format, we will always find a C after some numbers in the string, whereas with Excel we will never find any letters after numbers. We could use this as a test of format with something like:

// assumes test case line in std::string in_str
bool found_num = false, is_excel = true;
for (char c: in_str){
    if ('0' <= c && c <= '9') {
        found_num = true;
    } else {
        is_excel = !found_num;
    }
}
// ...

The solution does this in a better way:

int n, x, y;
if (sscanf(s, "%*c%d%*c%d", &x, &y) == 2) {
  // RC to Excel
  ...
} else {
  // Excel to RC
  ...
}

The string %*c%d%*c%d will match on the RC format, but not Excel; %*c matches on and throws away any non-numeric characters, whereas %d matches on numeric characters and stores them in the respective variable. For an RC string, R and C are thrown away but the numbers following them are stored in x and y (so (sscanf() will return 2). On an Excel string, this won't match so nothing is stored in x or y (and sscanf() will return 0).

Excel to RC conversion

This is the easier conversion, conceptually. We can copy the row portion and print it as-is. For the column portion, we have to convert from base-26 to base-10. A base-10 number represents addition of successive powers of 10, each times a constant: 12345 in base-10 means 5*(10^0) + 4*(10^1) + 3*(10^2) + 2*(10^3) + 1*(10^4). So for the column string, we can map each letter to a number (i.e. A=1, B=2, ... , Z=26) and then associate each with a power of 26. Consider RZA: A=1, Z=26, and R=18, so we can write it as 1*(26^0) + 26*(26^1) + 18*(26^2) = 12845.

We have a problem: C++ has no built-in for integer exponentiation. There are a couple workarounds. We could try writing one ourselves:

typedef unsigned uint;
uint exp(uint pow){return (pow ?  26 * exp(pow-1) : 1); }

or

typedef unsigned uint;
uint exp(uint pow) {
    uint sum = 1;
    for (uint i = 1; i <= pow; i++) { sum *= 26;} 
    return sum; 
}

The iterative version is slightly faster (by a few ten-thousandths of a second on my machine, probably due to the time involved with stack frame creation/cleanup) but we have bigger problems to worry about. Using unsigned ints means we can't compute negative powers, but those are ruled out by the problem statement so again we don't care.

Another approach would be to use a hashtable for powers of 26 since the problem constraints mean we'll never compute 26^n for n > 4 (though this requires more code):

typedef unsigned uint;

uint exp26(uint pow) {
  switch (pow) {
    case 0:
      return (uint)1;
    case 1:
      return (uint)26;
    case 2:
      return (uint)676;
    // ...
  }
}

However, the solution does none of these:

int n,x,y;
char s[64],*p;
...
if(sscanf(s,"%*c%d%*c%d",&x,&y)==2) {
    // RC to Excel 
} else {
    // Excel to RC 
    for(x=0,p=s;*p>64;++p) 
        x=x*26+*p-64;
    printf("R%sC%d\n",p,x);
}

Let's take this apart, starting with for(x=0,p=s;*p>64;++p). After sscanf() returns 0, x and y are uninitialized, so x is zeroed and will store the value of the column string as it's converted to base-10. We also set p to the first character in the string. On each iteration, we increment p (which will add 1 byte to the address) and then evaluate it.

Our termination condition is that the character p points to is less than 64; 65 is the ASCII code for A, so during each iteration of our loop p must point to a char that represents some letter from A-Z. The problem ensures each test case is a valid Excel or RC string, so while a test like *p>64 && *p < 91 would be more correct, it isn't necessary. When the loop ends, it will thus point to the first number in the string, i.e. the row portion of the string. We will then be able to print it directly, since it's already in base-10.

The next line is the most confusing: x=x*26+*p-64;. First, what does it actually do? Let's add parens to make order of operations explicit:

1. Dereference: x*26+(*p)-64
2. Multiplication: (x*26)+(*p)-64
3. Add / sub, with L-to-R associativity: ((x*26)+(*p))-64

The entire result is stored in x repeatedly, so we can use substitution and write an entire loop as a single line. Using the previous example of converting RZA to 12845:

(((((((((0*26)+(82))-64)*26)+(90))-64)*26)+(65))-64)

then drop some redundant parens to get

((((0*26)+(82-64))*26+(90-64))*26+(65-64))
((((0)+(18))*26+(26))*26+(1))
((18*26+(26))*26+(1))
((468+26)*26)+1
12845

So we can see that this computes the right answer despite not using exponents, but why is it equivalent to our previous method using powers of 26? We can factor one into the other with a little high-school-level math:

((((0*26)+(82-64))*26+(90-64))*26+(65-64))
     ^------drop since it evaluates to 0
(((82-64)*26+(90-64))*26+(65-64))
                      ^--- distribute over inner expression
(82-64)*26^2 + (90-64)*26 + (65-64)*26^0
                                     ^---26^0=1, so (65-64)*26^0=(65-64)

So we know x will contain the now base-10 value of the column, and at the end of the loop p points at the first number of the column portion (already base-10), so all we have to do is print them with R and C, and we're done with the test case:

printf("R%sC%d\n",p,x);