Пожалуйста, прочтите новое правило об ограничении использования AI-инструментов. ×

Блог пользователя raghav_19

Автор raghav_19, история, 4 года назад, По-английски

In this problem, i was using fft to solve it but found very strange behaviour between two case. submission1 in which my fft code and its function are written are written normally which gave me TLE in mostly all cases but in submission2 when I put all fft function into struct and my code get AC.

struct is the only change between two submission. Can someone explain the reason behind this.

  • Проголосовать: нравится
  • +57
  • Проголосовать: не нравится

»
4 года назад, # |
  Проголосовать: нравится +45 Проголосовать: не нравится

The difference is that the compiler deduced that mod was in fact a constant when it was in struct scope, and avoided using the expensive idiv instruction. ll mod=M; is a very bad idea, a single const would speed your code up a lot without relying on the compiler being that smart.

  • »
    »
    4 года назад, # ^ |
      Проголосовать: нравится +11 Проголосовать: не нравится

    Thanks for the help, You are right I just checked again by adding const and it speed up the code by around 4 times. but I have 2 doubt here.

    1. why compiler deduced mod as constant in struct scope. I mean mod value can be changed, right?

    2. Either mod is const or not , how it is effecting the runtime?.

    I tried to search both question but couldn't find anything. If you have anything to read can you please share it.

    • »
      »
      »
      4 года назад, # ^ |
        Проголосовать: нравится +6 Проголосовать: не нравится

      For (2), you can try to use godbolt to try to see the assembly output of mod a constant or not. You can see the compiler will optimize and not use the idiv mentioned above.

    • »
      »
      »
      4 года назад, # ^ |
        Проголосовать: нравится +22 Проголосовать: не нравится

      It can be deduced because it's a member variable of a struct, and there isn't any code which modifies it. Interestingly, just having a function in that struct returning a non-const pointer to mod will break the assumption and your program will be slower. You may ask the question why the same can't be said for the global variable? It has to do with the concept of linkage. Global variables by default have external linkage, meaning that, in theory, some other code (for example, in another cpp file) can access it and modify it while the program is running, and that's why the compiler can't assume its value won't change, and therefore has to emit the slower idiv.

      As I said, if you don't know the modulo in advance, you must use the expensive idiv, but if you do, there are some tricks that allow you to compute the modulo faster. As a trivial example, if you want to compute modulo $$$2$$$, you just look at the last binary digit. What's cool is that similar tricks exist for all modulos.

      • »
        »
        »
        »
        4 года назад, # ^ |
          Проголосовать: нравится +3 Проголосовать: не нравится

        Thanks a lot for the explanation. conceptually it is more clear now.

        To get into more detail for understanding purpose I used golbolt. In first i used mod as int, it is using idiv instruction and in second i assigned it as const int now it start using some trick without idiv instruction.

        To check the same in struct as well. I used with const int in struct but in this case it is still using idiv instruction which is not what you told above. Can you check this

        • »
          »
          »
          »
          »
          4 года назад, # ^ |
          Rev. 2   Проголосовать: нравится 0 Проголосовать: не нравится

          Here the mod is a non-static (const) member. The compiler still can't assume that the mod will be same for every call of the method since there can be a different instances of the struct with different mods. For example, you can have

          check one;     // one.mod == 654562
          check two{42}; // two.mod == 42
          one.square(100);
          two.square(100);
          

          You can make the mod a static member by static const int mod = 654562 for the compiler to optimize it.

          • »
            »
            »
            »
            »
            »
            4 года назад, # ^ |
              Проголосовать: нравится 0 Проголосовать: не нравится

            I understood your point but in Accepted submission, I only wrote ll mod=M in struct and according to godbolt compiler it is using idiv instruction in same case then how it gets optimized.

      • »
        »
        »
        »
        4 года назад, # ^ |
          Проголосовать: нравится 0 Проголосовать: не нравится

        btw, even if you don't know the modulo during compilation time, but have a batch of mods by the same modulo, you can preprocess something(basically the same thing that compiler does during the compilation) and then divide without idiv. There's a library called libdivide that does that

        • »
          »
          »
          »
          »
          4 года назад, # ^ |
            Проголосовать: нравится 0 Проголосовать: не нравится

          Could you elaborate on this?

          • »
            »
            »
            »
            »
            »
            4 года назад, # ^ |
              Проголосовать: нравится 0 Проголосовать: не нравится

            in what way?

            • »
              »
              »
              »
              »
              »
              »
              4 года назад, # ^ |
                Проголосовать: нравится 0 Проголосовать: не нравится

              but have a batch of mods by the same modulo, you can preprocess something and then divide without idiv.

              I don't understand what we can preprocess, and avoid idiv.

              • »
                »
                »
                »
                »
                »
                »
                »
                3 года назад, # ^ |
                Rev. 2   Проголосовать: нравится 0 Проголосовать: не нравится

                the same thing the compiler preprocesses. I do not know the details from the top of my head, but it should be googleable or you can check sources of libdivide

  • »
    »
    3 года назад, # ^ |
      Проголосовать: нравится 0 Проголосовать: не нравится

    I dont underestand very well, in few words, initialize a variable like mod is faster if i declare as const?

    • »
      »
      »
      3 года назад, # ^ |
        Проголосовать: нравится +5 Проголосовать: не нравится

      No, it's not faster. What's faster is division by a constant compared to division by a variable. That is why:

      const int MOD = 1000000009;
      ...
      a % MOD
      

      and

      a % 1000000009
      

      are both much faster than

      int MOD = 1000000009;
      ...
      a % MOD
      

      That is because when MOD is constant, the compiler can optimize division to a multiplication and a shift. If it's not a constant, this optimization can't be done. (in theory it can be done, but calculating how much to shift and what to multiply by is slower than just performing a division)