Blog entries - Codeforces

#	User	Rating
1	tourist	4009
2	jiangly	3831
3	Radewoosh	3646
4	jqdai0815	3620
4	Benq	3620
6	orzdevinwang	3529
7	ecnerwala	3446
8	Um_nik	3396
9	gamegame	3386
10	ksun48	3373

#	User	Contrib.
1	cry	164
1	maomao90	164
3	Um_nik	163
4	atcoder_official	160
5	-is-this-fft-	158
6	awoo	157
7	adamant	156
8	TheScrasse	154
8	nor	154
10	Dominater069	153

437A - The Child and Homework

We enumerate each choice i, and then enumerate another choice j (j ≠ i), let cnt = 0 at first, if choice j is twice longer than i let cnt = cnt + 1, if choice j is twice shorter than i let cnt = cnt - 1. So i is great if and only if cnt = 3 or cnt = - 3.

If there is exactly one great choice, output it, otherwise output C.

437B - The Child and Set

We could deal with this by digits.

Because lowbit(x) is taking out the lowest 1 of the number x, we can enumerate the number of the lowest zero.

Then, if we enumerate x as the number of zero, we enumerate a as well, which a × 2^x is no more than limit and a is odd. We can find out that lowbit(a × 2^x) = 2^x.

In this order, we would find out that the lowbit() we are considering is monotonically decresing.

Because for every two number x, y, lowbit(x) is a divisor of lowbit(y) or lowbit(y) is a divisor of lowbit(x).

We can solve it by greedy. When we enumerate x by descending order, we check whether 2^x is no more than sum, and check whether there is such a. We minus 2^x from sum if x and a exist.

If at last sum is not equal to 0, then it must be an impossible test.

Why? Because if we don't choose a number whose lowbit = 2^x, then we shouldn't choose two numbers whose lowbit = 2^x - 1. (Otherwise we can replace these two numbers with one number)

If we choose one number whose lowbit = 2^x - 1, then we can choose at most one number whose lowbit = 2^x - 2, at most one number whose lowbit = 2^x - 3 and so on. So the total sum of them is less than 2^x and we can't merge them into sum.

If we don't choose one number whose lowbit = 2^x - 1, then it's just the same as we don't choose one number whose lowbit = 2^x.

So the total time complexity is O(limit).

437C - The Child and Toy

The best way to delete all n nodes is deleting them in decreasing order of their value.

Proof:

Consider each edge (x, y), it will contribute to the total cost v_x or v_y when it is deleted.

If we delete the vertices in decreasing order, then it will contribute only min(v_x, v_y), so the total costs is the lowest.

437D - The Child and Zoo

First, there is nothing in the graph. We sort all the areas of the original graph by their animal numbers in decreasing order, and then add them one by one.

When we add area i, we add all the roads (i, j), where j is some area that has been added.

After doing so, we have merged some connected components. If p and q are two areas in different connected components we have merged just then, f(p, q) must equals the v_i, because they are not connected until we add node i.

So we use Union-Find Set to do such procedure, and maintain the size of each connected component, then we can calculate the answer easily.

437E - The Child and Polygon

In this problem, you are asked to count the triangulations of a simple polygon.

First we label the vertex of polygon from 0 to n - 1.

Then we let f[i][j] be the number of triangulations from vertex i to vertex j. (Suppose there is no other vertices and there is an edge between i and j)

If the line segment (i, j) cross with the original polygon or is outside the polygon, f[i][j] is just 0. We can check it in O(n) time.

Otherwise, we have $\text{[math]}$ , which means we split the polygon into the triangulation from vertex i to vertex k, a triangle (i, k, j) and the triangulation from vertex k to vertex j. We can sum these terms in O(n) time.

Finally,the answer is f[0][n - 1]. It's obvious that we didn't miss some triangulation. And we use a triangle to split the polygon each time, so if the triangle is different then the triangulation must be different, too. So we didn't count some triangulation more than once.

So the total time complexity is O(n³), which is sufficient for this problem.

438D - The Child and Sequence

The important idea of this problem is the property of $\text{[math]}$ .

Let $\text{[math]}$ .

So, $\text{[math]}$ .

If k = 0, $\text{[math]}$ remains to be x.

If k ≠ 0, $\text{[math]}$ .

We realize every time a change happening on x, x will be reduced by at least a half.

So let the energy of x become $\text{[math]}$ . Every time when we modify x, it may take at least 1 energy.

The initial energy of the sequence is $\text{[math]}$ .

We use a segment tree to support the query to the maximum among an interval. When we need to deal with the operation 2, we modify the maximum of the segment until it is less than x.

Now let's face with the operation 3.

Every time we modify an element on the segment tree, we'll charge a element with $\text{[math]}$ power.

So the total time complexity is : $\text{[math]}$ .

By the way, we can extend the operation 3 to assign all the elements in the interval to the same number in the same time complexity. This is an interesting idea also, but a bit harder. You can think of it.

438E - The Child and Binary Tree

Let f[s] be the number of good vertex-weighted rooted binary trees whose weight exactly equal to s, then we have:

f[0] = 1

$\text{[math]}$

Let F(z) be the generating function of f. That is, $\text{[math]}$

And then let $\text{[math]}$

So we have:

F(z) = C(z)F(z)² + 1

`` + 1'' is for f[0] = 1.

Solve this equation we have:

$\text{[math]}$

So the remaining question is: how to calculate the multiplication inverse of a power series and the square root of a power series?

There is an interesting algorithm which calculate the inverse of a power series F(z):

We use f(z) ≡ g(z) (mod zⁿ) to denote that the first n terms of f(z) and g(z) are the same.

We can simply calculate a formal power series R₁(z) which satisfies R₁(z)F(z) ≡ 1 (mod z¹)

Next, if we have R_n(z) which satisfies R_n(z)F(z) ≡ 1 (mod zⁿ), we will get:

(R_n(z)F(z) - 1)² ≡ 0 (mod z²ⁿ)

R_n(z)²F(z)² - 2R_n(z)F(z) + 1 ≡ 0 (mod z²ⁿ)

1 ≡ 2R_n(z)F(z) - R_n(z)²F(z)² (mod z²ⁿ)

R_2n(z) ≡ 2R_n(z) - R_n(z)²F(z) (mod z²ⁿ)

We can simplely use Fast Fourier Transform to deal with multiplication. Note the unusual mod 998244353 (7 × 17 × 2²³ + 1), thus we can use Number Theoretic Transform.

By doubling n repeatedly, we can get the first n terms of the inverse of F(z) in $\text{[math]}$ time. It's because that $\text{[math]}$

We can just use the idea of this algorithm to calculate the square root of a power series F(z):

We can simply calculate a power series S₁(z) which satisfies S₁(z)² ≡ F(z) (mod z²ⁿ)

Next, if we have S_n(z) which satisfies S_n(z)² ≡ F(z) (mod zⁿ), we will get:

(S_n(z)² - F(z))² ≡ 0 (mod z²ⁿ)

S_n(z)⁴ - 2S_n(z)²F(z) + F(z)² ≡ 0 (mod z²ⁿ)

S_n(z)² - 2F(z) + F(z)²S_n(z)^- 2 ≡ 0 (mod z²ⁿ)

4F(z) ≡ S_n(z)² + 2F(z) + F(z)²S_n(z)^- 2 (mod z²ⁿ)

4F(z) ≡ (S_n(z) + F(z)S_n(z)^- 1)² (mod z²ⁿ)

$\text{[math]}$

So, $\text{[math]}$

By doubling n repeatedly, we can get the first n terms of the square root of F(z) in $\text{[math]}$ time.

That's all. What I want to share with others is this beautiful doubling algorithm.

So the total time complexity of the solution to the original problem is $\text{[math]}$ .

My code

There is an algorithm solving this problem using divide and conquer and Fast Fourier Transform, which runs in $\text{[math]}$ . See the C++ code and the Java code for details.

Full text and comments »