If $$$n$$$ is odd, let $$$k=\frac{n+1}{2}$$$ be the width of the last block. It is possible to create a square of side length $$$k$$$ using every block as follows:

• Line $$$1$$$ contains a $$$1 \times k$$$ block;
• Line $$$2$$$ contains a $$$1 \times 1$$$ block and a $$$1 \times (k-1)$$$ block;
• Line $$$3$$$ contains a $$$1 \times 2$$$ block and a $$$1 \times (k-2)$$$ block;
• $$$\ldots$$$
• Line $$$i$$$ contains a $$$1 \times (i-1)$$$ block and a $$$1 \times (k-i+1)$$$ block;
• $$$\ldots$$$
• Line $$$k$$$ contains a $$$1 \times (k-1)$$$ block and a $$$1 \times 1$$$ block.

Since the area of this square is $$$k^2$$$, and the $$$n+1$$$-th block has a width of $$$k$$$ tiles, the total area of the first $$$n+1$$$ blocks is equal to $$$k^2+k \lt (k+1)^2$$$. Therefore, the answer for $$$n+1$$$ is also $$$k$$$.

In conclusion, the answer for each testcase is $$$\lfloor \frac{n+1}{2} \rfloor$$$.

Time complexity per testcase: $$$O(1)$$$.

#include<bits/stdc++.h>

using namespace std;

typedef long long ll;
void testcase(){
    ll n;
    cin>>n;
    cout<<(n+1)/2<<'\n';
}
int main()
{
    ll t; cin>>t; while(t--)
       testcase();
    return 0;
}

Good problem

Ok problem

Bad problem

Didn't solve it, idk

In a diverse string, there are at most $$$10$$$ distinct characters: '0', '1', $$$\ldots$$$, '9'. Therefore, each of these characters can appear at most $$$10$$$ times in a diverse string.

With all this in mind, the maximum possible length of a diverse string is $$$10^2=100$$$. To solve this problem, we only need to check whether each substring of length $$$l \le 100$$$ is diverse.

Time complexity per testcase: $$$O(n \cdot 10^2)$$$

#include<bits/stdc++.h>

using namespace std;

typedef long long ll;
void tc(){
    ll n;
    string s;
    cin>>n>>s;
    ll ans=0;

    for(ll i=0;i<s.size();i++){

        int fr[10]{}, distinct=0, max_freq=0;

        for(ll j=i;j<s.size() && (++fr[s[j]-'0'])<=10;j++){

            max_freq=max(max_freq,fr[s[j]-'0']);
            if(fr[s[j]-'0']==1) distinct++;

            if(distinct>=max_freq) ans++;
        }
    }
    cout<<ans<<'\n';
}
int main()
{

    ios_base::sync_with_stdio(false); cin.tie(0); cout.tie(0);
    ll t; cin>>t; while(t--) tc();
    return 0;
}

Good problem

Ok problem

Bad problem

Didn't solve it, idk

Let's consider the prefix sum array $$$s=[a_1,a_1+a_2,\ldots,a_1+a_2+\ldots+a_n]$$$.

For every index $$$i$$$ such that $$$a_i=0$$$, if we change the value of $$$a_i$$$ to $$$x$$$, then every element from the suffix $$$[s_i,s_{i+1},\ldots,s_n]$$$ will be increased by $$$x$$$. Therefore, if $$$a_{i_1}=a_{i_2}=\ldots=a_{i_k}=0$$$, we'll partition array $$$s$$$ into multiple subarrays:

• $$$[s_1,s_2,\ldots,s_{i_1-1}]$$$;
• $$$[s_{i_2},s_{i_2+1},\ldots,s_{i_3-1}]$$$;
• $$$\ldots$$$
• $$$[s_{i_k},s_{i_{k+1}},\ldots,s_n]$$$;

Since none of the elements from the first subarray can be changed, it will contribute with $$$fr[0]$$$ — the number of occurences of $$$0$$$ in $$$[s_1,s_2,\ldots,s_{i_1-1}$$$ towards the final answer.

For each of the other subarrays $$$s_l,s_{l+1},\ldots,s_r$$$, let $$$x$$$ be the most frequent element in the subarray, appearing $$$fr[x]$$$ times. Since $$$a_l=0$$$, we can change the value of $$$a_l$$$ to $$$-x$$$. In this case, every $$$x$$$ in this subarray will become equal to $$$0$$$, and our current subarray will contribute with $$$fr[x]$$$ towards the final answer.

Time complexity per testcase: $$$O(NlogN)$$$

#include <bits/stdc++.h>

using namespace std;
typedef long long ll;
const ll MAXN=2e5+5;

ll a[MAXN];
map<ll,ll> freq;

void tc(){
    ll n;
    cin>>n;
    ll maxfr=0,current_sum=0,ans=0;
    bool found_wildcard=0;
    freq.clear();
    for(ll i=0;i<n;i++){
        cin>>a[i];

        if(a[i]==0){

            if(found_wildcard) ans+=maxfr;
            else ans+=freq[0];

            found_wildcard=1;

            maxfr=0,freq.clear();
        }

        current_sum+=a[i];
        maxfr=max(maxfr,++freq[current_sum]);
    }
    if(found_wildcard) ans+=maxfr;
    else ans+=freq[0];

    cout<<ans<<'\n';
}

int main()
{
    ios_base::sync_with_stdio(false), cin.tie(0);
    ll t; cin>>t; while(t--)
        tc();
    return 0;
}

Good problem

Ok problem

Bad problem

Didn't solve it, idk

Lemma: An array $$$a_1,a_2,\ldots, a_n$$$ can be fully deleted via a sequence of operations if and only if it satisfies both of the following constraints:

1. $$$n$$$ is even

2. The maximum frequency of any element in the array is at most $$$\frac n2$$$.

Since the maximum frequency of a value for every subsegment $$$[a_l,a_{l+1},\ldots,a_r]$$$ can be computed in $$$O(n^2)$$$, it is possible to precompute all subsegments which can be deleted via a sequence of operations.

Let $$$dp[i]$$$ be the maximum length of a final array consisting of $$$a_i$$$ and some subsequence from the first $$$i-1$$$ elements. Initially, $$$dp[i]$$$ is set to $$$1$$$ if the prefix $$$[a_1,a_2,\ldots, a_{i-1}]$$$ can be fully deleted. Otherwise, $$$dp[i]=0$$$.

For every pair of indices $$$i$$$ and $$$j$$$ ($$$1 \le j \lt i \le n, a_i=a_j$$$), if we can fully delete subarray $$$[a_{j+1},a_{j+2},\ldots a_{i-1}]$$$, then we can append $$$a_i$$$ to any final array ending in $$$a_j$$$. Naturally, $$$dp[i]$$$ will be strictly greater than $$$dp[j]$$$. This gives us the following recurrence:

If we define a final array as a subsequence of equal elements from the array $$$a$$$, to which $$$a_{n+1}$$$ is forcefully appended, then the final answer can be written as $$$dp[n+1]-1$$$. Note that, when computing $$$dp[n+1]$$$, $$$a_j$$$ should not be compared to $$$a_{n+1}$$$.

Total time complexity per testcase: $$$O(n^2)$$$.

#include<bits/stdc++.h>

using namespace std;
typedef long long ll;
const ll NMAX=5e3+5;

ll dp[NMAX],fr[NMAX],a[NMAX];
void tc(){
    ll n,maxfreq=0;

    cin>>n;
    for(ll i=1;i<=n;i++)
        cin>>a[i];

    dp[0]=dp[n+1]=0;

    for(ll j=1;j<=n;j++) fr[j]=0;
    for(ll i=1;i<=n+1;i++){
        if(i%2 && maxfreq<=i/2)
            dp[i]=1;
        else
            dp[i]=0;
        maxfreq=max(maxfreq,++fr[a[i]]);
    }
    for(ll i=1;i<=n;i++){

        for(ll j=1;j<=n;j++) fr[j]=0;
        maxfreq=0;

        if(dp[i]>0) /// If there is no subarray ending in a[i], then some subarrays beginning with a[j] might be incorrectly flagged as possible final arrays
        for(ll j=i+1;j<=n+1;j++){
            if((j-i)%2 && maxfreq<=(j-i)/2 && (j==n+1 || a[i]==a[j]))
                dp[j]=max(dp[j],dp[i]+1);

            maxfreq=max(maxfreq,++fr[a[j]]);
        }
    }
    cout<<dp[n+1]-1<<'\n';
}
int main()
{
    ios_base::sync_with_stdio(false); cin.tie(0); cout.tie(0);
    ll t; cin>>t; while(t--)
        tc();
    return 0;
}

Good problem

Ok problem

Bad problem

Didn't solve it, idk

We can see that in the final multiset, each number $$$A_i$$$ from the initial multiset will be assigned to a subset of values $$$x_1, x_2,....,x_k$$$ such that their product is $$$A_i$$$. Every such multiset can be created. Also let $$$vmax$$$ be the maximum value in the initial multiset.

Consider iterating through the minimum value. To get the best maximum value that has this minimum we fixed, one can use dynamic programming $$$dp[i][j] = $$$the best possible maximum if we had number $$$i$$$ and the minimum value in the product is $$$j$$$, $$$j$$$ is a divisor of $$$i$$$. This dp can be calculated in $$$O(vmax \cdot log^2(vmax))$$$ for all values. We can also process all updates when incrementing the minimum and keeping the result with a total effort of $$$O(vmax \cdot log^2(vmax))$$$. Thus we have a total time complexity of $$$O(vmax \cdot log^2(vmax))$$$. However, this ( we hope ) won't pass.

Here is a way more elegant solution ( thanks to valeriu ):

To get things straight, we observe that when we decompose a number, we just actually write it as a product of numbers. We still consider fixing the minimum value used in our multiset, call it $$$L$$$. We will further consider that we iterate $$$L$$$ from the greatest possible value (i.e. $$$vmax$$$) to $$$1$$$, and as such, we try at each iteration to calculate the minimum possible value which will appear in any decomposition as the maximum value in said decomposition.

We shall now retain for each element the minimal maximum value in a decomposition where the minimum of that decomposition is $$$L$$$, let's say for element $$$i$$$, this value will be stored in $$$dp[i]$$$. Naturally, after calculating this value for every number, we now try to tweak the calculated values as to match the fact that, after this iteration concluded, we will decrease $$$L$$$. For further simplicity, we denote $$$L' = L - 1$$$.

So, we changed the minimum value allowed. What changes now? Well, it is easy to see that any element that is not divisible by $$$L'$$$ won't be affected by this modification, as much as it is impossible to include $$$L'$$$ in any decomposition of said number. So it remains to modify the multiples of $$$L'$$$. Let's take a such number, $$$M$$$. How can we modify $$$dp[M]$$$? Well, we can include $$$L'$$$ in the decomposition as many times as we want, and then when we decide to stop including it, we remain with a number which needs to be further decomposed. The attributed maximum of this value should already be calculated, so we can consider it as a new candidate for the update of $$$dp[M]$$$. This idea could be implemented simpler by going through multiples of $$$L'$$$, and for an element, updating $$$dp[i]$$$ with $$$dp[i / L']$$$ (by taking the minimum of either)

We now need for each iteration to keep track of the attributed maximums of each element that actually appears in our initial list. This can be done by keeping a frequency of all these elements, and after all updates, taking the (already known) maximum of the previous iteration and decreasing it until we find another element that actually appears in our set (this can be verified by simply checking the frequency). This is correct, as much as all the values gradually decrease as $$$L$$$ decreases, so their maximum would have to decrease as well.

Final time complexity: $$$O(vmax * log(vmax))$$$

#include <bits/stdc++.h>

using namespace std;

using ll = long long;

const int nmax = 5e6 + 5;
int appear[nmax];
int mxval[nmax];
int toggle[nmax];

int main()
{
    cin.tie(nullptr)->sync_with_stdio(false);
    int t;
    cin >> t;
    while (t--)
    {
        int n, m, mn = nmax, mx = 0;
        cin >> n >> m;
        for (int i = 0; i <= m; ++i)
        {
            appear[i] = toggle[i] = mxval[i] = 0;
        }
        for (int i = 0, x; i < n; i++)
        {
            cin >> x;
            appear[x] = 1;
            toggle[x] = 1;
            mn = min(mn, x);
            mx = max(mx, x);
        }
        for (int i = 0; i <= mx; i++)
        {
            mxval[i] = i;
        }
        int ptr = mx, smax = mx - mn;
        for (int i = mx; i >= 1; i--)
        {
            for (ll j = (ll)i * i; j <= mx; j += i)
            {
                if (appear[j])
                    toggle[mxval[j]]--;
                mxval[j] = min(mxval[j], mxval[j / i]);
                if (appear[j])
                    toggle[mxval[j]]++;
            }
            while (toggle[ptr] == 0)
                ptr--;
            if (i <= mn)
                smax = min(smax, ptr - i);
        }
        cout << smax << '\n';
    }
}

Good problem

Ok problem

Bad problem

Didn't solve it, idk