gop2024's blog

Codeforces Round #569
By gop2024, history, 6 years ago, translation, In English

Hi, Codeforces!

We are glad to invite you to take part in Codeforces Round 569 (Div. 1) and Codeforces Round 569 (Div. 2), which will be held on Friday, June 21, 2019, at 19:35. The round will be rated for all participants from both divisions.

Problems for the round have been proposed by Ivan ScreaMood Fedorov, Kyrill kirillbogatiy Bessonov, Mukhammadjon Mr.Hakimov Hakimov, Fedor ---------- Ushakov, Fedor Kuyan Kuyanov, and me, Dmitry gop2024 Grigoryev.

The round have been prepared by us, Dmitry gop2024 Grigoryev, Fedor ---------- Ushakov, Dmitry TheWayISteppedOutTheCar Piskalov and Mukhammadjon Mr.Hakimov Hakimov.

We'd like to give thanks to Ildar 300iq Gainullin for excellent coordination of the round, to Sooke Sulfox Gnar, Xiuhan sunset Wang, Ziqian TLE Zhong, Junzhao FizzyDavid Yang, Jiaxuan samjia2000 Gao for testing and to Mike MikeMirzayanov Mirzayanov as well for his unbelievable Codeforces and Polygon platforms!

Participants in each division will be offered 5 problems and 2 hours to solve them. During the round, you will be helping pupils of one usual Moscow school. Score distribution will be announced, traditionally, closer to the start of the contest

Good luck!

UPD Score distribution for Div.2 is standart — 500-1000-1500-2000-2500

Score distribution for Div.1 — 500-1000-1500-1750-2250

UPD2

Thank you for your participation in the contest!

List of the winners of the contest:

Div.2

  1. PSMaoTheKingOfAzerbaijan

  2. atacan

  3. Shayan.Kashefi_A

  4. LiPro

  5. BrutBurger

Div.1

  1. Radewoosh

  2. ACRush

  3. ecnerwala

  4. mango_lassi

  5. neal

My frank congratulations to all the winners!

The editorial

  • Vote: I like it
  • +529
  • Vote: I do not like it

Comments Comments (290)
| Write comment?
»
6 years ago, # |
  Vote: I like it +19 Vote: I do not like it

We hope for a good contest.

→ Reply
»
6 years ago, # |
  Vote: I like it +187 Vote: I do not like it

The whole IOI Chinese team tested the round + 300iq coordinated it.

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    So we should expect for a very interesting and tricky contest. :D

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +46 Vote: I do not like it

      We should expect strong pretests and no errors in the contest.

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
        ← Rev. 2   Vote: I like it +11 Vote: I do not like it

        This comment didn't age well ;p

        I loved Div.2 B's pretests. This was my first time hacking and I could hack 6!

        → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +4 Vote: I do not like it

    You forgot Sulfox.

    → Reply
»
6 years ago, # |
  Vote: I like it -9 Vote: I do not like it

The whole IOI Chinese team tested the round!!!**- **

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +29 Vote: I do not like it

    I think you should write your own comments

    → Reply
»
6 years ago, # |
← Rev. 3   Vote: I like it 0 Vote: I do not like it

Round tested by Chinese.. Hope it will give me an unforgettable experience :)

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +12 Vote: I do not like it

    It's actually a Russian round, it was tested by the Chinese.

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    What exactly do you mean by unforgettable? Don't scare me :P

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +26 Vote: I do not like it

      It's 0:22 in the morning in China, and the contest will be start in 40+mins. It's very unforgettable, isn't it? (though in another way)

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +31 Vote: I do not like it

        have a nap in case of brain power outage

        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
        ← Rev. 2   Vote: I like it 0 Vote: I do not like it

        I had just slept to 00:30,and when I woke up and saw the rest time to wait...It should be unfogettable.

        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it -11 Vote: I do not like it

        Well, it indeed was unforgettable. B got hacked :/

        → Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

" During the round you will be helping for pupils of one usual Moscow school." What does this mean?

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    i too want to know....

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +32 Vote: I do not like it

      pupils -> schoolkid / students.

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +84 Vote: I do not like it

        pupils -> between 1200 and 1400 rating

        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        i don't think i can help them in any way , i started coding almost 3 months ago and my rating is falling continuously.... i think i need help ....

        → Reply
        • »
          »
          »
          »
          »
          6 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          It will increase once you forget thinking about it! (except just after the contest :P)

          → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +49 Vote: I do not like it

    This is the theme of the contest, the questions will be like "Pupils of a school in Moscow want to perform a certain task, but its too difficult for them, so they are asking for your help..."

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +254 Vote: I do not like it

      Nice. I am too tired of helping vasya and petya

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +6 Vote: I do not like it

        Nastya, Tanya

        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        Should I mention Alice and Bob? I still don't if Alice is a female or male XD

        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +20 Vote: I do not like it

        The characters in these problem statements are more unrealistic than characters in porn movies.

        → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    Main characters of problems will be school pupils/students.

    → Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it +7 Vote: I do not like it

Xuihan sunset Wang

I think Xuihan is a typo. You may mean Xiuhan.

(Sorry for my poor English)

→ Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it -9 Vote: I do not like it

IOI Chinese testers team lol

→ Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it +13 Vote: I do not like it

A 5 problem contest after long days

→ Reply
»
6 years ago, # |
  Vote: I like it +4 Vote: I do not like it

Nearly 12 p.m at my place. But all love for programming, I will try my best.

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    for me it is nearly 12 am, but Im getting into skipping lunch, so not that bad as it is for you

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +7 Vote: I do not like it

      VietNam and Brazil: 12 hours away ^^

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
        ← Rev. 2   Vote: I like it +1 Vote: I do not like it

        Now it is almost 2 a.m. for you '-' Are you going to participate?

        → Reply
        • »
          »
          »
          »
          »
          6 years ago, # ^ |
            Vote: I like it +3 Vote: I do not like it

          At my place, the contest starts at 11.35 p.m and ends at 1.35 a.m. I think it'll be fine for me to participate

          → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I think you meant 12 a.m. because by convention, 12 p.m. is noon, not midnight.

    → Reply
»
6 years ago, # |
  Vote: I like it +19 Vote: I do not like it

helping kids, noble task.....who's gonna help me help them......lol

→ Reply
»
6 years ago, # |
  Vote: I like it +6 Vote: I do not like it

time to think

→ Reply
»
6 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Best of Luck for your first contest as a problemsetter.

→ Reply
»
6 years ago, # |
  Vote: I like it +22 Vote: I do not like it

Whole people wrote the same comment "ioi Chinese testers team" What is happening!

→ Reply
»
6 years ago, # |
  Vote: I like it -6 Vote: I do not like it

I wish positive rating for every participant :)

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    This is not possible :)

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
      ← Rev. 3   Vote: I like it 0 Vote: I do not like it

      if you consider 0 as a positive number it is possible, LOL, just kidding.

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +114 Vote: I do not like it

        The total rating decreases after every contest, otherwise, ratings will become higher and higher because new users will join Codeforces with the initial 1500 rating points.

        → Reply
        • »
          »
          »
          »
          »
          6 years ago, # ^ |
            Vote: I like it +26 Vote: I do not like it

          if no new users participate, then the total rating won't decrease

          → Reply
          • »
            »
            »
            »
            »
            »
            6 years ago, # ^ |
              Vote: I like it +9 Vote: I do not like it

            Also if no users participate, then the total rating won't decrease

            → Reply
            • »
              »
              »
              »
              »
              »
              »
              6 years ago, # ^ |
                Vote: I like it +12 Vote: I do not like it

              Also if one user participates, then there won't be any change

              → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    you cleverly wished for yourself. Nice

    → Reply
»
6 years ago, # |
  Vote: I like it +65 Vote: I do not like it

In fact, Sulfox's name is not Sooke Gnar. However, he loves Gnar —— The Missing Link very much.

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Chinese people have interesting names

    → Reply
»
6 years ago, # |
  Vote: I like it -23 Vote: I do not like it

Ｔhis time is not friendly to Chinese players

→ Reply
»
6 years ago, # |
  Vote: I like it +3 Vote: I do not like it

Time changed from 19:35 UTC to 22:05 UTC.
Time increased = 150 minutes.
May we also get +150 rating today.

→ Reply
»
6 years ago, # |
  Vote: I like it +36 Vote: I do not like it

New Codeforces round, new chance to fall!

→ Reply
»
6 years ago, # |
  Vote: I like it +616 Vote: I do not like it

→ Reply
»
6 years ago, # |
  Vote: I like it +8 Vote: I do not like it

So lucky that the contest starts right before I get home

→ Reply
»
6 years ago, # |
  Vote: I like it +2 Vote: I do not like it

A delayed contest has never been good for my rating.

→ Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it 0 Vote: I do not like it

UPS is needed.

→ Reply
»
6 years ago, # |
  Vote: I like it +21 Vote: I do not like it

What is the score distribution?

→ Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it -19 Vote: I do not like it

。

→ Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it +71 Vote: I do not like it

When reading the comment section ends!!!

→ Reply
»
6 years ago, # |
← Rev. 4   Vote: I like it +41 Vote: I do not like it

System Test :(

a

->How 30 minutes before contest felt!!

→ Reply
»
6 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Now we have Caseforces!

→ Reply
»
6 years ago, # |
  Vote: I like it +26 Vote: I do not like it

The pretest of problem B is BRILLIANT, because I have just made the first TWO Successful Hacking Attempt in my life !

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +4 Vote: I do not like it

    What was the Hack?

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      The first one is 2\n 0 -1 (which get the wrong answer —— 0 -1), and the second one is 3\n -1 -1 -1 (which get the wrong answer —— -1 -1 -1). Hence , I guess the pretest of it is too big for some wrong program (?)

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        my program failed at 9th pretest ,can you help me....

        → Reply
        • »
          »
          »
          »
          »
          6 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          What was ur logic?
          The logic is simple make all non negative numbers negative by operating on them. If n is odd pick the number with highest magnitude and make it posetive.
          Print all the numbers.

          → Reply
          • »
            »
            »
            »
            »
            »
            6 years ago, # ^ |
            ← Rev. 2   Vote: I like it -15 Vote: I do not like it

            I solved using C Language ,and used long long int for input but it's it shows large product not possible at test case #9 hence failed What to do?

            → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I got one on 3/n 1 1 -1

      → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    pretests were too dumb, there is no pretest with a[i]=0

    → Reply
»
6 years ago, # |
  Vote: I like it +12 Vote: I do not like it

How to solve D?

→ Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 2   Vote: I like it +34 Vote: I do not like it

    A 6x6 can be traversed like this, other cases are also analogous. You can easily show that this method does not use the same vector twice.

    1	23	25	36	14	12	
3	21	27	34	16	10	
5	19	29	32	18	8	
7	17	31	30	20	6	
9	15	33	28	22	4	
11	13	35	26	24	2

    But most probably this is not the only solution. There can be other ways as well.

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +11 Vote: I do not like it

      Is it the only simulation or any proper mathematics.

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
        ← Rev. 4   Vote: I like it +19 Vote: I do not like it

        You could call it intuition.

        First check whether you can always do it for some $$$1$$$x$$$N$$$ grid.

        Hint
        Complete Solution
        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
        ← Rev. 2   Vote: I like it 0 Vote: I do not like it

        Using that method, it's easy to show that once you take a certain vector, you never use it again. That's because the squares on which you could use that vector have already been visited before.

        → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      what if columns are odd sized?

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +7 Vote: I do not like it

        It does not differ much

        1	23	25	38	36	14	12	
3	21	27	40	34	16	10	
5	19	29	42	32	18	8	
7	17	31	41	30	20	6	
9	15	33	39	28	22	4	
11	13	35	37	26	24	2
        → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      nice!

      → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +34 Vote: I do not like it

    Starting from (1, 1), move to (n, m), then (1, 2), then (n, m-1), and so on till (n, 1). Then go to (2, 1), then (n-1, m), then (2, 2), then (n-1, m-1), and so on till (n-1, 1). Keep repeating this process. If you reached a row i where row i == n-i+1. Then just from (i, 1) move to (i, m), then (i, 2), and so on till you visit the whole row.

    → Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 2   Vote: I like it +5 Vote: I do not like it

    For solving D, i converted it into 1-D array and then using two pointer i solved it . For eg . 2 3 ==> 2*3 = 6 we are firstly in 1,then i will visit 6 then 2, then 5, then 3 and so on .

    → Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Is div1E an exercise on the proportional cake-cutting + optimizations to pass $$$O(n^2\cdot\log{n})$$$ queries?

→ Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 2   Vote: I like it 0 Vote: I do not like it

    The 3 accepted submissions seems like $$$O(n\cdot log n\cdot log 10^{18})$$$

    → Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 2   Vote: I like it +10 Vote: I do not like it

    Our solution seems to work in $$$O(n \cdot log(10^{18}))$$$ queries

    → Reply
»
6 years ago, # |
  Vote: I like it +6 Vote: I do not like it

What is in pretest 9 of problem B Nick and Array?

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I got stuck on the same pretest :(

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +9 Vote: I do not like it

    Try 2 3 4. Answer should be -3 -4 4

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      how did you solve B?

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
        ← Rev. 2   Vote: I like it +1 Vote: I do not like it

        The only way to increase product is by increasing |a| for each a in array. Only positive numbers can be increased in magnitude by the given method i.e. 4 becomes -5 so |-5| > |4|.

        So first change all positive numbers like this including 0 to -1. Now all are negative. If even sized array, we cant do better. If odd sized change the largest negative number like -100 to 99. This makes product positive

        → Reply
        • »
          »
          »
          »
          »
          6 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          what is the logic behind taking the largest negative number in magnitude instead of smallest negative number in magnitude

          → Reply
          • »
            »
            »
            »
            »
            »
            6 years ago, # ^ |
              Vote: I like it +1 Vote: I do not like it

            When you change an element with value -x from negative to positive it becomes x-1. This multiplies the magnitude of the product by (x-1)/x. You want this to be as large as possible, and it gets larger as x gets larger.

            → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      No I don't think so . My answer is -3 -4 4 according to 2 3 4. I think it is 9 -4 -5. the answer should be 9 -4 -5 .

      → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    take the biggest negative number instead of least.

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I was making this mistake, can you prove your greedy approach ?

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        if you are multiplying 2 numbers x and y, such that |x| > |y| then you can visualize it in 2 ways, first adding y x times and second adding x y times. Now if you decrease x then you are just removing 1 y and if you decrease y then you are just removing 1 x. Now you can see which one is optimal.

        → Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

please help me to identify my mistake in problem B https://codeforces.net/contest/1180/submission/55894819

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    6 -1 -2 -3 0 0 0 try getting this case correct, almost all hacks are the similar to this (afaik).

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    The order of array is destroyed after sort. Also, the logic is very convoluted. Observe that -a -1 only increases |a| for positive numbers. Try using this fact

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    try this test case 3 -4 -9 -8 Your output is -4 7 8

    → Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 3   Vote: I like it 0 Vote: I do not like it

    have you change the element which is equal to zero 4 0 0 0 0 ans should be -1 -1 -1 -1 but your code print 0 0 0 0

    → Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

shit that m1 range i took it int got wrong

→ Reply
»
6 years ago, # |
  Vote: I like it +13 Vote: I do not like it

I hope to finally become a candidate master :).

→ Reply
»
6 years ago, # |
  Vote: I like it +9 Vote: I do not like it

I'm just gonna skip B in future rounds, C is almost always easier for some reason.

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +17 Vote: I do not like it

    The logic I used for b was much simpler than c imo, (convert all to negative and then convert the least to positive if n%2==1).

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      can u explain your logic with this test case ? 5 1 2 3 4 -1

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +1 Vote: I do not like it

        it has not to be the least negative, it has to be the least negative different to -1

        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        first you convert all to negative, ie -6 -2 -3 -4 -5 -1. now because n%2 is even, this is the answer. if it was odd, (if converted array is -6 -2 -3 -4 -5), then pick the smallest value and make it positive (5,-2,-3,-4,-5)

        → Reply
        • »
          »
          »
          »
          »
          6 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          I mean this. 5 is the number of the element. 5

          1 2 3 4 -1

          → Reply
          • »
            »
            »
            »
            »
            »
            6 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            -2 -3 -4 4 -1. you can look at my code in standings, its the same logic.

            → Reply
          • »
            »
            »
            »
            »
            »
            6 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            well after making all the integers negative I brute forced but even then I am getting the wrong answer for test case 9!!

            → Reply
            • »
              »
              »
              »
              »
              »
              »
              6 years ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              but if u r done brute force then surely u r multiplying all the numbers initially but from that overflow occurs, due to than u cannot get yur answer correct in large value,

              → Reply
              • »
                »
                »
                »
                »
                »
                »
                »
                6 years ago, # ^ |
                  Vote: I like it 0 Vote: I do not like it

                Oh yes,I realized that later.By the way thank you for reply.

                → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      me too

      → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      even that, C you did not have to think anything, just implement it

      → Reply
    • »
      »
      »
      6 years ago, # ^ |
      ← Rev. 4   Vote: I like it 0 Vote: I do not like it

      Take this case of length 3

      -2 -3 -4
      I think your logic will not work for this case

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
        ← Rev. 2   Vote: I like it 0 Vote: I do not like it

        you can check my code directly, I used this logic. In this case the output is -2 -3 3.

        → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +1 Vote: I do not like it

      its a very nice solution, a solution I never thought of, not even a slightest bit.

      → Reply
    • »
      »
      »
      6 years ago, # ^ |
      ← Rev. 2   Vote: I like it 0 Vote: I do not like it

      Edit:nvm i got it

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
        ← Rev. 2   Vote: I like it 0 Vote: I do not like it

        Hey, you can either look it through an example: (-2,-3,-5) changed to (1,-3,-5) or (-2,-3,4). clearly, the 2nd product is greater.

        Proof:

        Let a1,a2,..., an be +ve numbers in sorted order.

        It would be obvious that:

        (a1-1)*(a2*a3*a4*...*an) < (an-1)*(a1*a2*...*a(n-1))

        → Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it +130 Vote: I do not like it

Very nice and enjoyable problems!

→ Reply
»
6 years ago, # |
  Vote: I like it +11 Vote: I do not like it

What concept was involved in Div1C ?

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    Hint: imagine it as brackets

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    Consider suffixes of cummulative frequency of both dishes and people.

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Can you please expand a bit on your solution, because I couldn't think of something with these hints. Thanks!

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
      ← Rev. 3   Vote: I like it +71 Vote: I do not like it

      Let $$$fstudents(i)$$$ be the frequency of students with money equal to $$$i$$$.
      Let $$$fdishes(i)$$$ be the frequency of dishes that cost $$$i$$$ money.

      We are looking for the greatest j such that $$$\sum_{k = j}^{1000000} fdishes(k) > \sum_{k = j}^{1000000} fstudents(k)$$$.

      We can consider $$$dif(i) = fdishes(i)-fstudents(i)$$$. We want to find the rightmost index $$$i$$$ such $$$\sum_{k=i}^{1000000}dif(k) > 0$$$.

      We can have a segment tree that stores the value of maximum suffix sum of $$$dif$$$ in range. The updates are just adding and substracting 1 from leaves of the tree. We can answer queries in $$$ O(Qlog^210^6) $$$ by binary searching to find the first $$$i$$$ such that the maximum suffix sum is greater than 0. We can do this faster, in $$$O(Qlog10^6)$$$ by the method of descending the tree. I hope i explained it clearly.

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +5 Vote: I do not like it

        Thanks Charis02

        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +11 Vote: I do not like it

        Hey, I think I’m missing something simple. Why is it sum(dif(k)) > 0 instead of sum(dif(k)) < 0? If the sum is positive for some i, doesn’t that mean that we have more students than dishes for that i, not that there’s a dish we can take.

        → Reply
        • »
          »
          »
          »
          »
          6 years ago, # ^ |
            Vote: I like it +3 Vote: I do not like it

          Yes you are right, sorry. I meant to write $$$dif(i)=fdishes(i)-fstudents(i)$$$ . Thanks,I'll correct it.

          → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Hey, one doubt. If you just update the leaves in the seg tree will it be suffice ? Dont we need to update all suffixes of greater length than this ? I.e lazy prop. Bcoz if you just update one suffix then the suffix greater than this length won't have updated value and will have one student or dish less ?

        → Reply
        • »
          »
          »
          »
          »
          5 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          No, because by updating the leave you update all ranges containing it (standard segment tree update). You don't need lazy prop because you update only one leaf not a range of them.

          → Reply
        • »
          »
          »
          »
          »
          5 years ago, # ^ |
            Vote: I like it +5 Vote: I do not like it

          code_kit

          By every node $$$nd$$$ storing the maximum suffix sum of $$$dif$$$ in range, Charis02 means suffix with respect to $$$nd$$$, not the whole array.

          → Reply
»
6 years ago, # |
  Vote: I like it +14 Vote: I do not like it

Can we actually solve D like this or is it just luck?

55894627

→ Reply
»
6 years ago, # |
  Vote: I like it -12 Vote: I do not like it

Delay in System tests?

→ Reply
»
6 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Can Someone explain why their code give TLE -

https://codeforces.net/contest/1180/submission/55899448

https://codeforces.net/contest/1180/submission/55903257

→ Reply
»
6 years ago, # |
  Vote: I like it +70 Vote: I do not like it

→ Reply
»
6 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Is there a hacking phase? I suppose only Educational rounds have hacking phase.

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Yes, only Educational rounds and div 3 rounds

    → Reply
»
6 years ago, # |
  Vote: I like it +26 Vote: I do not like it

It is really a good contest.

→ Reply
»
6 years ago, # |
  Vote: I like it +25 Vote: I do not like it

It happened to me for the first time. My solution was hacked midway between the contest but after a while I got a notification that my solution was correct.

Link : https://codeforces.net/contest/1180/submission/55886651

→ Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 3   Vote: I like it +156 Vote: I do not like it

    I hacked you during the contest with the test case:

    3
0 -1 -1

    After pressing the hack button, I found that it should be an unsuccessful hacking attempt but it turned out to be a successful one

    I thought it's quite strange and I've reported this to problem setters during the contest Few minutes later they replied "under investigation", and your code is Accepted, my hack became an "ignored"

    Actually I'm not sure what's going on lol

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +55 Vote: I do not like it

      Thanks a lot buddy, You sacrificed 50(150) points just for honesty. Cheers.

      → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +9 Vote: I do not like it

      But the setters might be having similar system tests as well, so setters please be careful of your system tests for Div2 B

      → Reply
    • »
      »
      »
      6 years ago, # ^ |
      ← Rev. 3   Vote: I like it +26 Vote: I do not like it

      We had a little bug in our checker and it didn`t work correctly when the answer is $$$0$$$ and the jury answer is different from the participant answer as a multiset. We are sorry for the mistake.

      → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +76 Vote: I do not like it

      Hello there.

      Sorry, that was definitely my fault, because as a coordinator I missed this case with $$$0$$$ in the checker. There were no similar tests in other hacks or in systests, so everything should be fine.

      My apologies to shpvb, who suffered from my mistake.

      I will be more attentive to these kind of things next time, sorry again.

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +49 Vote: I do not like it

        No problem buddy, that is totally cool with me.

        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Hey 300iq, My submission has not been evaluated yet. Is there any problem?

        → Reply
        • »
          »
          »
          »
          »
          6 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Sorry, It got evaluated in the end.

          → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +48 Vote: I do not like it

      Also, thank you for your honesty! Without you, we wouldn't notice this bug.

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +37 Vote: I do not like it

        Thanks for nice contest and interesting problems, too!

        → Reply
»
6 years ago, # |
← Rev. 3   Vote: I like it +7 Vote: I do not like it

I think this works for E, but I wrote too many bugs so couldn't get it to work in time :(

Edit: 55909022. Turns out some constant optimization was required too, so I wasn't that close

solution to E
→ Reply
»
6 years ago, # |
  Vote: I like it -47 Vote: I do not like it

I think can't pass D because of lines:

if (n > m) {
swap(n, m);
}

I did not find the anti test. Please count my solution as correct if this is the case :(

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it -70 Vote: I do not like it

    gop2024 please look this. I know it looks stupid but I don't want to lose points because of this.

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it -51 Vote: I do not like it

    Give me more minuses. My logic was correct. If it was n <= m code will passed. You are ratists even did'nt read what I wrote. I wish your solutions failed due to checker get Compilation Error on test 99 and etc.

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +1 Vote: I do not like it

      Lol. If you swap lines, you swap coordinates. So you should also swap coordinates in your algorithm

      → Reply
»
6 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Why the system test still pending?

→ Reply
»
6 years ago, # |
  Vote: I like it -122 Vote: I do not like it

everyone should be given positive bonus rating because of unexpected power cut occurred before start of exam ..... it mentally affected many people ,hence not giving their best output in exam.....

note: if some one don't like it ,kindly don't down vote it as i already have negative contribution, just ignore this comment and move on.

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    Actually it made me feel lucky, due to wrong timing I thought contest will start 1 hour later than actual time

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it -17 Vote: I do not like it

    how do i delete my comment????

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +13 Vote: I do not like it

    The power companies should give everyone free money because of unexpected power outage... it mentally affected many people.

    → Reply
»
6 years ago, # |
  Vote: I like it +8 Vote: I do not like it

Any hints for Div1 D?

→ Reply
»
6 years ago, # |
  Vote: I like it +8 Vote: I do not like it

How to solve DIV2 E ?

→ Reply
»
6 years ago, # |
  Vote: I like it +2 Vote: I do not like it

When your rate reach the buttom look at the bright side there's one way to go (me trying to motivate myself after my stupidity streak this month)

→ Reply
»
6 years ago, # |
  Vote: I like it +8 Vote: I do not like it

Div2B have bad pretests.

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    And a lot of people had wrong solutions, FeelsBadMan

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +17 Vote: I do not like it

    Strangely enough, almost always in Div. 2 problem B has the worst [pretests passed / accepted] ratio. Not sure about the reason for this phenomenon.

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    It's a comparative thing. Before system test, my standing was 618, after system test, it's 557. So if you avoid all pitfall but others not, you can have a better standing. The contestants who found the pitfall and avoided it should have an advantage over those don't.

    → Reply
»
6 years ago, # |
  Vote: I like it +84 Vote: I do not like it

Good old five-problem contest. Skill over speed. Thank you.

→ Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 2   Vote: I like it +25 Vote: I do not like it

    I like this grand old way of 5 problems. I personally don't enjoy subtasks and contests which has very large problems like 7 — 8+. less and good questions are good to stay you focus during the contest, rather than moving here and there to solve subtasks.

    → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +18 Vote: I do not like it

    I doubt it's possible to make skill over speed contest if it lasts less than, at least, 2h30m. When contest lasts a bit longer even if it has more problems in it, there's much more bigger probability that you will reach problems you can't solve because of your skill and not speed before the contest time ends.

    → Reply
»
6 years ago, # |
  Vote: I like it -13 Vote: I do not like it

Hackforces

→ Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it -137 Vote: I do not like it

Please make pretests not so strong next time :)

It seems like there are no fails on systests at all

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +60 Vote: I do not like it

    Are you really suggesting they should intentionally make pretests weaker?

    Imagine failing to system tests because the specific corner case your code didn't handle was removed from the pretests, while others fail pretests and can fix their code. Yeah, no thanks, more rounds like this please.

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it -71 Vote: I do not like it

      I suggest that pretests shouldn't cover, like, everything.

      So it's more about they shouldn't make them intentionally strong.

      → Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 3   Vote: I like it +18 Vote: I do not like it

    If you are bored with nothing to do, I wouldn't mind knowing what's wrong with my D. :)

    EDIT: I just mean I want someone to debug my code :)

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +91 Vote: I do not like it

      Well, it clearly says that.

      wrong answer 1st numbers differ — expected: '204997350968', found: '204998250971'

      You output incorrect number.

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it +8 Vote: I do not like it

        Brilliant explanation on how the WA verdict works! You should totally write a blog on that.

        → Reply
    • »
      »
      »
      6 years ago, # ^ |
      ← Rev. 4   Vote: I like it +13 Vote: I do not like it

      Your code only computes the correct answer for paths through the first centroid found. This seems to suffice for almost all cases (as Radewoosh mentioned), but not always when the tree has two centroids (which test case 103 satisfies). Try comparing my getAns function with your get_subtree function.

      EDIT: As saketh mentioned, there are also counterexamples where the tree has only one centroid.

      (mine) 55894131

      (yours) 55893926

      → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Can you please tell if my solution for D is correct?
        The final structure will look like a cycle with branches coming out of the nodes which are a part of the cycle. Let there be 'x' nodes in the cycle and size of the subtree going out of these x nodes be a_1,a_2,...,a_x. So now there will be an extra path from any node in one subtree to other subtree. Thus there will be a_1*(a_2+a_3+...+a_x) + a_2*(a_3+a_4+...a_x) +...+ a_x-1*(a_x) extra paths. This can be written as: ((a_1+a_2+...+a_x)^2 — (a_1^2+a_2^2+...+a_x^2))/2 . First term is equal to n^2. So we need to minimize 2nd term.
        So now choose arbitrary root. Let there be a node 'u' with 2 of its children u_1,v_1. let say we want to connect u_1 , v_1 then 2nd term of above equation will become u_1^2+v_1^2+(n-u_1-v_1)^2 . Similarly if want to connect a child of u_1 say u_2 to v_1 then the 2nd term will become u_2^2+(u_1-u_2)^2+(n-u_1-v_1)^2. This expression is less than that if we connected u_1,v_1. So we can say by induction that for any node 'u' we will want to connect 2 of its leaves such that their lca is 'u'. Now if sizes of subtree of node 'i' is denoted by s_i then we can define 2 values for each node: d_i=min(d_i,d_child+(s_i-s_child)^2) and f_i=d_i+(s_i)^2-2*n*s_i. We can show that the second term of above equation can be written as:
        if a node 'u' has only one child: n^2+f_child.
        if a node 'u' has more than one child: n^2+ f_child1 + f_child2 +2*(s_child1)*(s_child2).
        Now our equation was telling us number of extra paths on adding an edge, so it must be positive and for any node 'u' if we subtract the second term from first we get -(f_child) or -(f_child1 + f_child2 +2*(s_child1)*(s_child2)) respectively which means that f_i will be negative. So for any node if we choose 2 of its children such that their f_i are smallest among all children we can get the max number of extra paths added. So we find this for all nodes and find their max.

        My solution:55909246

        → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it -18 Vote: I do not like it

    Better call GreenGrape

    → Reply
»
6 years ago, # |
  Vote: I like it +24 Vote: I do not like it

I have only looked at problem C so far, but it is already enough for me to conclude that it was a brilliant round. Thanks guys!!!!!!!!!!!!

→ Reply
»
6 years ago, # |
  Vote: I like it +4 Vote: I do not like it

Wasn't Div2-C easier than Div2-B ?

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it -26 Vote: I do not like it

    (Give me negative vote).Div2D was easier than B and C.

    → Reply
»
6 years ago, # |
  Vote: I like it +1 Vote: I do not like it

System testing completed good rate for everyon.

→ Reply
»
6 years ago, # |
  Vote: I like it +189 Vote: I do not like it

pctr

→ Reply
»
6 years ago, # |
  Vote: I like it +6 Vote: I do not like it

I've never waited so long for systest/rating changes!! Good round tho :-)

→ Reply
»
6 years ago, # |
  Vote: I like it +7 Vote: I do not like it

11 and counting :P

→ Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

can someone help me in Div2 problem B.

I am getting wrong answer in test_case #60.

→ Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Any hints for div2C? Thanks :)

→ Reply
»
6 years ago, # |
  Vote: I like it +19 Vote: I do not like it

Is this true that in d1d optimal path will contain the centroid of the tree? Does anybody have a proof/a counterexample?

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    What do you mean by optimal path? Could you share some hints about how to solve the problem?

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      By optimal path I mean the path between vertices which will be connected with an additional edge. The hint is that if we group the vertices by the vertex on the path which is closest to them, only the sizes of the groups matter somehow (you have to minimize the sum of squares of these sizes).

      → Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 2   Vote: I like it 0 Vote: I do not like it

    Hmm, don't know about centroids, but there always is an optimal path which connects two leafs.

    (Guess it's obvious though)

    → Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 2   Vote: I like it +115 Vote: I do not like it

    It's false. This type of graph produces a counter-example:

    There are $$$N = W + 2T + 2$$$ nodes. When $$$2(W + 1) > N$$$, $$$C$$$ is the unique centroid.

    The orange edge produces an optimal path going through $$$C$$$. The number of simple paths when adding it is $$$2 { N \choose 2 } - { T + 1 \choose 2 } - { W \choose 2 }$$$.

    The blue edge produces $$$2 { N \choose 2 } - { W + 2 \choose 2 }$$$ simple paths. Any choice of $$$W$$$ and $$$L$$$ such that $$$C$$$ is the unique centroid and $$${ W + 2 \choose 2 } < { W \choose 2 } + { T + 1 \choose 2 }$$$ produces a counter-example.

    $$$W = 17$$$, $$$T = 8$$$ is one such choice.

    → Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 5   Vote: I like it +81 Vote: I do not like it

    After reading socketnaut's comment, I wondered that what is the minimum case which all of optimal path does not contain any of the centroid of the tree.

    I wrote a brute-force code, and proved that there is no such case which is $$$N=3,4,5,6,7,8,9,10$$$ and $$$11$$$. Seems like socketnaut's counter-example ($$$N=35$$$) could be the minimum.

    Source Code of Brute Force: Link

    UPD: Finally I realized that socketnaut's second comment means my user photo :)))))))

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      :) "Who is this man and why is he trying to sell me this graph."

      I have some intuition for why this form might produce the smallest possible. Adding leaves to $$$C$$$ is the best way to make it be the centroid without incentivizing the best path to go through $$$C$$$. Or to put it a different way, if the best path doesn't pass through $$$C$$$, we can reformat all of the subtrees that are below $$$C$$$ and away from the best path into leaves attached directly to $$$C$$$. Such a change doesn't worsen the best path and doesn't improve the paths going through $$$C$$$.

      Going to the best path, suppose that the blue edge connects some vertices $$$u$$$ and $$$v$$$, and $$$\ell$$$ is their LCA when the tree is rooted at the centroid. If either $$$u$$$ or $$$v$$$ has a "worse" path coming down from $$$\ell$$$, the orange edge can always connect the centroid to the one that is better. So, we need them to be symmetric. Minimizing the path between $$$C$$$ and $$$\ell$$$ and making the trees from $$$\ell$$$ down to $$$u$$$ and $$$v$$$ linear gives the best configuration.

      → Reply
»
6 years ago, # |
  Vote: I like it +9 Vote: I do not like it

My solution to Div. 2 D TLEed on TC74 when compiled with MSVC++ while the same exact solution ran in 280ms when compiled with G++. A custom test shows that my solution ran in 1029ms when compiled with MSVC++. Is MSVC++ really that much slower than G++?

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    Ah that's sad. Probably the constraints were too tight. Even I got TLE & afterwards got an AC just by replacing all cout's with printf.

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it +1 Vote: I do not like it

      Agreed. I was only able to get AC using VS by using printf, not even cout with ios_base::sync_with_stdio(false) ran in time, which I previously thought was only slightly slower than printf. I can't think of why the constraints need to be this tight, since as far as I can tell there isn't an easier solution that needs to be prevented from passing.

      → Reply
»
6 years ago, # |
  Vote: I like it +1 Vote: I do not like it

I am not sure if this is a right place to put my idea/complaint . I am from Beijing,Chine, and in the contest last night , I refresh codeforces.com and m2.codeforces.com for 25 minutes only to find a series of "This site can’t be reached". And this situation is common before. According the comments following the blog of Round569 , people out of China didn't encounter this annoying process. So , I write this wanting you to know what happens in China and hoping for a response. Maybe you buddies can help me to let worker in codeforces know the situation? :)

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +11 Vote: I do not like it

    Try codeforc.es

    → Reply
    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      that site works perfect , with only few seconds to load , which is uncommon in cf. thanks!!!

      → Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I am from Shanghai China, I did not encounter the situation you said. Maybe it's because the Great Fire Wall. Because of 70th anniversary of China, the censorship is strong now. I use VPN to visit Codeforces. Try using VPN.

    → Reply
    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      待我肉身翻墙日，youtube上把党夸

      → Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it +13 Vote: I do not like it

I should try this round because I think I can solve all problems in div.2 , but I am afraid that I will get lower rating. Maybe I should be braver.

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    In the short run, your rating may fluctuate. But in the long run, your rating converges to your skill. Participating and practicing more improves skill. So just calm down and focus on the long term performance. That's how I convince myself to not afraid of a drop in rating and participate as many as possible. Hope that helps.

    → Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Hi. So I was wondering about my submission for Problem B here.

The verdict says 'wrong answer multiply isn`t maximal possible', but not something like 'expected X but found Y'.

So, I just want to know whether there is some issue here? I don't see where my submission is wrong

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +4 Vote: I do not like it

    I have also done the same mistake , that you dont have to choose only positive max element. but negative max element (in absolute value) can be better choice .

    Eg -5 2 3 Here answer will be 4 -3 -4

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
      ← Rev. 2   Vote: I like it 0 Vote: I do not like it

      Oh no! I messed up the compare function. Should have payed more attention while coding it.

      UPD: Changing compare function still doesn't work sadly :(

      → Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it +12 Vote: I do not like it

Again Editorials are late.

This is actually becoming very common these days. Earlier the editorials were published right after the system tests, but now they come really late.

→ Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it +88 Vote: I do not like it

the editorial flies away~~ pigeon is walking~~~

→ Reply
»
6 years ago, # |
  Vote: I like it +4 Vote: I do not like it

So where is the Editorial

→ Reply
»
6 years ago, # |
  Vote: I like it +3 Vote: I do not like it

if my submission got hacked, then how to know for which test case the submission is wrong??

→ Reply
»
6 years ago, # |
  Vote: I like it +3 Vote: I do not like it

How to solve Div 2(Problem E)??? Anyone..thankyou

→ Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Problem D: I submitted Submission 1 but it was showing 'TLE'. But then I again submitted by just changing 'endl' to '/n' and it got submitted. Accepted Submission. Please explain why this happened?

→ Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 2   Vote: I like it +14 Vote: I do not like it

    endl always causes a flush oepration, "\n" does not!Thats why endl is slower.

    → Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

How to solve Valeriy and Deque? I have used this code (python) but I am getting TLE in case 4 ~~~~~ n, q = map(int, input().split()) s = list(map(int, input().split())) query = [] for _ in range(q): query.append(int(input()))

if  q > 0:
    for i in range(1,query[-1] + 1):
        if i in query:
            print(s[0], s[1])

        if s[0] > s[1]:
            temp = s.pop(1)
            s.append(temp)
        else:
            temp = s.pop(0)
            s.append(temp)

~~~~~ Please any help will be appreciated

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    Queries can be up to 10**18. Don't you think it is kinda big number, u know?

    → Reply
    • »
      »
      »
      6 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Yeah. Could you suggest a better solution? I saw various accepted solutions but its hard to understand the logic of whats happening there

      → Reply
      • »
        »
        »
        »
        5 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        After make the biggest number in the first place... Guess what will happen then.

        → Reply
        • »
          »
          »
          »
          »
          5 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          After making the biggest element first all the element in the second place will move to the last position. And that would be a cycle. I under stand the part when the query is smaller than the position of biggest number in the list. But when the query is bigger than that no matter what the first number will be the biggest number but I do not understand a way to figure out second position number.

          I have seen the editorial and don't understand how they got the index position of the second position number.

          → Reply
          • »
            »
            »
            »
            »
            »
            5 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            Just use an array to record the answer of a cycle. Record the length of a cycle as well. To a big query, notice that the answer is related to (query_num — p1)%p2 , where p1 is the length of getting the biggest number as the first number and p2 is the length of a cycle. https://codeforces.net/contest/1180/submission/55891794 You may refer to my solution.

            → Reply
»
6 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Can someone prove the correctness of 55895158 (Div.1 D)? I calculated the answer using a method similar to the tree diameter. I just guessed it but don't know how to prove it.

→ Reply
»
6 years ago, # |
  Vote: I like it +21 Vote: I do not like it

May I get the editorial for this contest? gop2024 for Contest #569 (Div.2)

→ Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can someone help me understand div1 D? I can't see why in the first sample case the answer is 2. Won't he just add an edge between both nodes, then there can only be one simple path containing both edges that goes to both nodes? Otherwise it would break the rule "we consider only simple paths of length at least two".

→ Reply
  • »
    »
    6 years ago, # ^ |
    ← Rev. 2   Vote: I like it +16 Vote: I do not like it

    Ok, after examining the second sample case I get the idea that "length two" means two nodes and not two edges, is this proper? And I assume "loop" refers to self-loop?

    → Reply
»
6 years ago, # |
  Vote: I like it +16 Vote: I do not like it

Can we get Editorial for Contest, please? Thank you.

→ Reply
»
6 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Can someone help explain their thought process for Div 2 D?

→ Reply
»
6 years ago, # |
← Rev. 2   Vote: I like it -26 Vote: I do not like it

All the questions were long,except problem a.

→ Reply
  • »
    »
    6 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    You can reach red while reading one problem in under 5 minutes.

    → Reply
»
6 years ago, # |
  Vote: I like it 0 Vote: I do not like it

is there a solution for problem C ?

→ Reply